·Natural whip prestige series
·Middle Grade （standard cosmetic puff）
·Cost Value Grade-Loco Puff
·Good feel to the touch
·Forming process
•Prestige series Natural Whipped puff(R) -Soft feeling by thin cell wall
You can enjoy smooth touching as good as non-conventional. The industry’s first technology, we made a success about putting natural ingredients into the cosmetic puff. Natural ingredients reappear microscopic cell structure, because it is quite good much with latex rubber.
We used safety non-genetically-modified natural ingredients. The data is one of example.
|
Density |
0.163 g/cm3 |
|
Hardness |
58 |
|
Tensile strength |
140 kPa |
|
Elongation |
550 % |
|
Abrasion test(1000 times) |
- % |
|
Abrasion test(2000 times) |
2.03 % |
|
Light resistance |
a little |
|
Oil resistance(Paraffin) |
6 % |
|
Oil resistance(silicon) |
2 % |
|
Metal ion coloring (copper) ） |
a little |
|
Use for Application |
From powder foundation to Liquid foundation |
|
Type |
Moist feeling, cover the skin as much as you need. |
•Middle grade Standard products
We can vendor even as for the standard series by our combination technology
· Antibacterial anti-mold combination
Anti-copper ion combination
· Abundant color variations
We adjust it from combination not a process, these can maintain strength without promoting deterioration of the rubber.
|
Density |
0.150 g/cm3 |
|
Hardness |
62 |
|
Tensile strength |
149 kPa |
|
Elongation |
510 % |
|
Abrasion test(1000 times) |
- % |
|
Abrasion test(2000 times) |
3.5 % |
|
Light resistance |
a little |
|
Metal ion coloring (copper) |
a little |
|
Use for Application |
powder foundation; cream foundation |
|
Type |
Standard |
Cost Value series-moderate puff
By new combination,It is possible that the 10-20% cost cut of the general puff.However, you can feel good touch as same as general one.
· Safety
It produces it in the factory with the production results to the cosmetics maker. (MSDS existence)
· The touch
We keep the touch of the puff without using processing for a prevention of change in color. (We can submit the samples for confirmation of the usability.)
· The durability
It has been measured properties of physical data. (the data are an example)
|
Density |
0.111 g/cm3 |
|
Hardness |
68 |
|
Tensile strength |
124 kPa |
|
Elongation |
455 % |
|
Abrasion test(1000 times) |
1.8 % |
|
Abrasion test(2000 times) |
4.6 % |
|
Light resistance |
a little |
|
Oil resistance(silicon) |
2 % |
|
Metal ion coloring (copper) |
a little |
|
Use for Application |
powder foundation, cream foundation、 |
|
Type |
Cost performance |
We have overall production line and supervise all from materials to packaging. By deleting useless producing lines, we have achieved reasonable price and delivery time.
Normally, a sponge becomes harder as it goes fine, if density goes lower, it goes softer but rougher. INOAC’s process reformation has enabled to solve this trade-off-relation. As a result, we offer puffs that can be make ideal cosmetic result.
Contact us
