·Leak tests up to 20 bar and in vacuum
·Resolution up to 0.1 Pa (0.001 mbar)
·Reduction of the test time
·Easy to install and use
·Digital interface for PLC
·RS485/USB communication interfaces
·300 test tables
|
Power Supply |
24 Vdc - 1 A max |
|
Air source requirement |
Dry, non-condensing, 5-micron filtered, and oil-free air, compliant with ISO8573-1, 6x4 mm hose fitting Test pressure: externally regulated Pilot pressure for internal valves: 2.5 bar min, 10 bar max |
|
Sensor calibration |
Remote control software procedure |
|
A/D Converter |
24 bit |
|
Pressure Regulator |
External (option) |
|
Indicators |
4 LEDs: two yellow (test phases), green (passed), red (failed) |
|
Test counter |
PASSED and FAILED totals, resettable to zero |
|
Clock |
Date and time, with supercap, 7 days back up max |
|
Programmable parameters |
300 testing tables, general testing parameters |
|
PLC connection |
2 photocoupled inputs: START / RESET 4 photocoupled outputs: TEST RUNNING, PASSED, FAILED, ALARM |
|
Data interfaces |
CRS485 and USB communication interfaces with Modbus protocol RS232 interface to drive an external electronic pressure regulator |
|
Staubli® Connector |
Available on external connection for leak masters (option) |
|
Housing |
Unpainted aluminium |
Accessories
Pressure regulators
External vacuum generator
3-colours indicator light with loud sound alert
Air filters
Remote controllers
Printer and barcode reader for test traceablity
Calibration service
Each equipment is accompanied by a calibration report released by Tecna srl.
According to the requirements of ISO9001 standard, the calibration must be verified at specified intervals against national or international test masters.
Tecna srl, through its own specialized personnel and certified instruments, offers a complete scheduled calibration service.
DELTA TM3P pneumatic modules are the ultimate achievement in traditional leak testing and the best solution to integrate a reliable and compact testing station in automated systems.
The absence of display or push-buttons has permitted the reduction of the dimensions, making it possible to fit the module in every automation, as close as possible to the product to be tested, minimizing superfluous volumes and increasing the speed and sensitivity of the tests.
DELTA TM3P pneumatic modules can be connected to and controlled by every PLC and interfaced to operator terminals.
Contact us
