·Up to 4 adapters for bonding tubes with different diameter
·Adapters Internal and external bonding
·Rotating and vibrating system
·Programmable bonding sequence
·PLC interface for automation
·RS485 communication interface for data transmission
|
Power Supply |
12V DC, 1A, socket diameter 2.1mm Optional: 24V DC， M8 connector |
|
Keyboard |
4 keys: [R] Reset, [S] Sequence, back, forward |
|
Indicator light |
Green LED: power on Red LED: liquid level alarm/wheel alarm Yellow LED: Sequence/ photocell/ wheel position |
|
Wheel Dispensing |
up to 4 adaptor for bonding tubes with different diameter |
|
Standard Adapter |
Adapter for OUT diameter bonding: 4.1-5.5-6.8-9.54-12.0mm Depth: 4.0-6.0-8.0-10.00mm Adapter for INNER diameter bonding: 3.0mm（Out diameter Max. 10.0mm） Depth: from 2.0-8.0mm Adapters for simultaneous OD/ID bonding: Inner diameter: 3.0mm；Depth: 8.0mm；Out diameter: 4.1mm；Depth: 4.0mm |
|
Wheel Rotation |
Electronic drive via photocell or PLC command |
|
Solvent Tank |
250ml bottle |
|
Solvent Level Sensor |
Ultrasonic level sensor |
|
Solvent Level Control |
Automatic control and reset |
|
PLC Connection |
Optocoupler Input/Output for automatic system |
|
Data Interface |
RS485 communication interface |
|
Sequence Function |
The operator can programme repetitive sequences for bonding tubes with different diameters on the same assembly part |
|
Vibration |
Compensate for the tolerance of tube diameter (ovalization) |
DOSASET is a dispenser for cyclohexanone or similar solvents, used for manual bonding of plastic medical equipment, tubes and joints.
DOSASET does not use porous elements or capillary holes or fluid pumps: its adapters are directly dipped in the solvent, reducing the problems due to clogging or obstruction.
DOSASET employs a new patented method, based on a rotating and vibrating system: the dispensing adapters are mounted on the circumference of a wheel turning inside a chamber where the solvent level is continuously controlled.
The solvent is kept inside a sealed external 250 ml bottle and is automatically loaded trough a pneumatic micro-pump from the bottle to the dispensing chamber.
DOSASET ADVANTAGES
No maintenance is required to prevent clogging and obstruction
Constant solvent dispensing, determined only by the shape of the tube adapter
Reduce evaporation of the solvent in the dispensing chamber
No wrist rotation, reduces the risk of carpal rotation syndrome
Automatic control the solvent level by shutoff valve if the level cannot restored
The vibration of the tube adapter compensates the tolerance of the tube diameter
Up to 4 tube adapter for different diameters on the same instrument
The sequence of the tube adapter can be programmed for the subassemblies with different tube diameter
Only one selected tube adapter available for each new adapter, which can reduce errors.
Contact us
